media

Glass Bubblers: Worth It?

The Huniguide bubbler and Honeybird Core are Nectar Collector water filtration solutions available as attachments for the Huni Badger. They are made of durable, high quality borosilicate glass, which is extremely resistant to heat. Both bubblers feature patented spill-proof technology.

The Huniguide bubbler is a specially adapted version of the Honeybird Core. It's an exclusive collaboration with Nectar Collector for a bubbler that fits snugly onto the Huni Badger 510/EGO mouthpiece. Each Huniguide bubbler is 100% handmade in the state of Utah, with each being officially signed & numbered by master glass blower Kristian Merwin.

The Nectar Collector Honeybird Core and the Honeybird Delux wasn't originally created for the Huni Badger, so we've created the HBNC adaptor to join them to the Huni Badger. Every Honeybird Core and Delux Kit sold on www.hunibadger.com includes this adaptor. With the HBNC adaptor, you can also attach any other threaded Nectar Collector bubblers.

Other bubblers found online (globe, 510 bubblers) can also be attached to the 510/EGO Mouthpiece of the Huni Badger.  However, quality of the build varies and they usually don't have a spill-proof technology which Nectar Collector patented.

Why should I replace my stock 510 EGO mouthpiece with a Nectar Collector water filtration bubbler?

While the stock 510 EGO mouthpiece is perfectly fine to directly consume your extracts with, a water filtration system essentially cools the vapor and produces a smooth draw. The attachment keeps the temperature down and your Huni Badger cooled.

To install the Honeybird Core

  1. Fill Honeybird Core from the mouthpiece end with approximately 10% water. An easy trick to fill your bubbler up is to use bottled water. Simply unscrew the bubbler from the unit and place the mouth end onto the water bottle, then slowly push water up and into the bubbler. The water level should be lower than the inner tube to prevent water from draining out. To remove excess water, just blow into the bubbler in the upright orientation.
  2. Screw HBNC adapter clockwise onto your Honeybird Core (included with kit) Important: Do not use your fingers, as the threads are sharp! A coin or any thin straight edge can be used as a tool to screw the adapter on or off.
  3. Attach Honeybird Core + HBNC adapter into the mouthpiece port of the Huni Badger by screwing in clockwise.
  4. The flat indentation of the bubbler should be facing down during use for the percolation to work correctly .
  5. For best result, angle the Huni Badger at approximately 45 degrees during use.

To install the Huniguide bubbler:

  1. Fill Honeybird Core from the mouthpiece end with approximately 10% water. An easy trick to fill your bubbler up is to use bottled water. Simply unscrew the bubbler from the unit and place the mouth end onto the water bottle, then slowly push water up and into the bubbler. The water level should be lower than the inner tube to prevent water from draining out. To remove excess water, just blow into the bubbler in the upright orientation.
  2. With the 510/EGO mouthpiece secured, carefully rotate and slip the Huniguide bubbler onto the mouthpiece.
  3. Adjust the Huniguide so the flat indentation of the bubbler is facing down during use.
  4. For best result, angle the Huni Badger at approximately 45 degrees during use.
Comments: 2
Alexander Fabro 2018-10-22 18:39
Very useful info. Thanks!
Billy Bui 2018-11-30 01:07
I need the bubble nectar collector
Leave a Reply

Your email address cannot be published. Required fields are marked*